Walkie Talkie Range All That You Need To Know About.

don’t be confused about what’s a walkie talkie range or any other walkie talkie parameter. Simply, because in this article I will share with you all the information you need to analyze walkie talkie and decide if this is the walkie talkie you need.

A walkie-talkie is an electronic transceiver device that sends and receives radio waves. It can’t be both at a similar time. So, either it receives or sends radio waves. 

A walkie-talkie is used for many purposes. Such as the army, police, and emergencies, as well as for enjoyable outdoor use. Also, walkie-talkies are known as two-way radios, two-way transceivers, or (HT) handheld transceivers.

The walkie-talkie is a communication device. multiple handheld transceivers can use one channel, but only one of them can transmit at the time, where an unlimited number can listen. 

Each handheld transceiver has a telephone handset, speaker to listen to, microphone and an antenna to the receiver and send radio waves, a button to switch from receiver mode to sender mode.

How walkie talkies works?

A walkie-talkie to work needs two two-way radio configurated with the same channel. All the time the two-way radios works as receivers, to send and message, you need to push and keep pushing the switch button while you are talking, the time you release the button, you back to the receiver mode, and any message sent you will be able to hear it. 

What are the different walkie-talkies bands out there?

There are different Frequencies walkie talkies use:

FRS

The family radio service (FRS) is a radio service that uses 22 channels in the UHF band in the range of 462.5625 MHz to 462.7250 MHz. 

This Radio service is a free license. However, you have to follow the FCC.

GMRS

The general mobile radio service is intended for personnel use in general communication. The opposite of FRS, the GMRS offers higher power and less limitation.
The general mobile radio service requires a license to use. with a frequency range of 462 MHz-467 MHz.

The same as FRS، the GMRS also operates in the UHF band.

VHF

The “very high frequency” ranged from low band (49-108 MHz) to high band (169-216 MHz). VHF is used by outdoor walkie talkies where there are no obstacles, a clear outside area without trees and buildings.
The VHF has low frequencies that result in interference with other radio waves.

UHF

The “Ultra-high Frequency” that ranged between the low band (378-512 MHz) to high band (764-870 MHz)
The UHF, as they are in the ultra-high frequencies, leads to a better long-distance connection. Another thing you will acquire from UHF is that it may be interfering with other radio waves.

The UHF works better than VHF in inside areas where there are obstacles like the inside building is because of the very high frequencies that can go through the wall, steel, obstacles in general.

Is it necessary to walkie talkies be from the same brand to work together?

The quick answer is no. The only thing that needs to make different walkie talkies brands work together is to set them at the same channel inside the same band. This way, you will be able to add any branded walkie-talkie to your set just by configuring it.

Can VHF and UHF work together? 

No, they can’t communicate with each other, simply because each one of them has its own frequency range, and they don’t match up. 

What is the different walkie talkie range out there? 

The walkie talkie range is not a fixed factor, simply because it depends on the weather if the area is free of obstacles or not, which band the walkie-talkie use, power, and antenna size. 

Walkie Talkie Range

Can walkie-talkies communicate through walls?

Yes, with a walkie-talkie that uses ultra-high frequencies and good-sized antenna, and enough power. It’s possible to communicate with your team inside the building, Even if your team is located in a different building. The UHT walkie-talkies communicate through walls, steel, woods, and earth. 

What are the main factors to look at before buying a walkie-talkie? 

Well, as mentioned before,  there are many factors you have to look into before buying your walkie-talkies. Such As the frequency band, VHT or UHT. Each one has its parameter, its power in different areas.

Another thing you have to consider is the antenna used in the walkie-talkie, a good antenna means that your walkie-talkie will have a  good radio wave receive, and will receive distant waves too easily.

In the walkie-talkie market, each factory gives the range of its walkie-talkie. Generally, The communication range given is calculated in a free obstacles area. So if you have heard or read that the communication range is 100miles, don’t think you can use that walkie-talkie inside buildings believing that you can talk with a friend far away from you with 100miles. The walkie talkie range will reduce in obstacles areas.

Conclusion: 

I will End this article here hoping that you find the answers you are looking for. otherwise, there is a comment section feel free to leave a comment asking for anything related to walkie talkies. or maybe leave feedback about the article you read.